How do I fix the Bluetooth in my 2013 Dodge Dart?

How to Fix Bluetooth in a 2013 Dodge Dart
If the Bluetooth in your 2013 Dodge Dart is not working, there are a few steps you can try to troubleshoot and potentially fix the issue. Here are some suggestions based on the search results:
1. Reset the Bluetooth module: Disconnecting the negative battery terminal overnight may help reset the Bluetooth module and other modules in the car, potentially resolving the issue.
2. Check for software updates: Ensure that your car’s Uconnect system is up to date. Updating the system software may fix any bugs or compatibility issues that could be causing the Bluetooth problem.
3. Delete and re-pair your phone: Delete the Bluetooth pairing between your phone and the car, and then re-pair them. This can help establish a fresh connection and resolve any connectivity issues.
4. Perform a Uconnect reset: Hold down the voice recognition (VR) and phone buttons on the steering wheel while the vehicle is on. Then, turn off the vehicle and open the door for thirty seconds. This can help reset the Uconnect system and potentially fix the Bluetooth issue.
5. Consult a mechanic or dealership: If the above steps do not resolve the Bluetooth problem, it may be necessary to consult a mechanic or visit a Dodge dealership for further assistance. They can diagnose the issue and provide professional guidance.
Please note that these suggestions are based on user experiences and may not guarantee a solution for every case. If the problem persists, it is recommended to seek professional help.
I hope these suggestions help you resolve the Bluetooth issue in your 2013 Dodge Dart!

How do you reset a 2013 Dodge Dart?

Press down and hold the phone button and the VR button simultaneously. Turn Your ignition off, and open Your door. Wait for a count of 30 to 40 seconds, then close the door again. Start the engine, and the Uconnect will be reset.

What is the most common problem with the 2013 Dodge Dart?

According to many owners of the 2013 Dodge Dart, battery failure is a common problem for the model year. Most of them had to replace their car’s battery twice in two years. Drivers have reported that their battery died abruptly while they were driving. Most of them also had to deal with steering and braking issues.

How do I reset my Uconnect 2013?

Uconnect® Hard Reset Procedure

1. Press the hot and coup up and down buttons simultaneously for at least five seconds.
2. Scroll through the menu that pops up and select the choice prompting you to reset factory defaults.
3. Once selecting this option, wait roughly 30 seconds while the system reboots.

Why is my Uconnect Bluetooth not working?

Perform a hard reset in the phone by removing the battery (if removable – see your phone’s owner’s manual). Delete the pairing history in your phone and Uconnect® system, which is usually found in the phone’s Bluetooth® settings. Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your phone.

Why is my Bluetooth suddenly not working in my car?

If your car’s Bluetooth is paired but not working, you might want to check if both the device and car system’s software are up-to-date, remove and re-pair the device, or try resetting your device’s network settings.

How do you reset the Bluetooth on a 2013 Dodge Dart?

Simultaneously press the volume button and the tuner knob at the same time. Continue pressing them down for 10 – 20 seconds. After pressing the buttons for 10 – 20 seconds, the touchscreen display should flash the brand of your vehicle (FIAT, RAM, or Dodge), then proceed to go dark.

What is the life expectancy of a 2013 Dodge Dart?

According to getjerry.com, a Dodge Dart should last 200,000-250,000 miles with proper maintenance. With exceptional care, the car could even make it past the 250,000-mile point.

Do 2013 Dodge Dart have a lot of problems?

The Dodge Dart was an attractive and efficient ride, but it had some serious issues with its transmission and engine. Its 2013 debut year alone registered over 1,200 complaints with the NHTSA.

How do you soft reset Uconnect 2013?

So. And there it goes it’s going to reset. It’s going to reboot. I will give it a couple seconds. And see oh there it is it’s turning back on. And then that’s how you do a soft reset.

How do I reset my Dodge Dart touch screen?

But it is in the run mode. And once you have it in run mode all you’ll need to do is in this upper right corner of the screen.