How do I enter the code on my Ford Focus radio?

How to Enter the Code on Your Ford Focus Radio
To enter the code on your Ford Focus radio, follow these steps:
1. Find the serial number: Hold the 1 and 6 buttons on your radio to display the serial number.
2. Generate your 4-digit code: Enter the serial number into an online code generator and follow the steps to generate your activation pin.
3. Activate your radio: Make the payment (if required) and receive the code instantly. Enter the code on your radio to start enjoying your music again.
Please note that if your radio displays “CODE INCORRECT PLEASE WAIT,” “LOCKED,” or “WAIT,” you need to leave it switched on for a maximum of one hour before entering the code. If your radio displays “LOCKED 10,” you can bypass it by pressing and holding the number six button while switching the radio on. If your radio displays “LOCKED 13,” it will need to be decoded by a local Car Radio Decoding company.
I hope this helps! Let me know if you have any other questions.

How do you reset the radio in a Ford Focus?

Press and hold the Seek up and the audio unit Power buttons simultaneously until the screen goes black. Wait for the system reset to complete. Press the audio unit Power button to switch the system on.

How do I enter my 6000cd radio code?

So we’ll press that nine times. And then to three which is over here. Which is zero. So we just need to press that until we get it back to zero. And then we just need to put. One. So there we go.

How do you unlock a stereo code?

Try these places first:

1. Glovebox – Some radio codes appear on a sticker in the glovebox.
2. Vehicle handbook – You might find the code in your vehicle handbook under the stereo or security section.
3. Manufacturer website – The manufacturer’s website should give you more information about how to retrieve the code for free.

What is the Ford 5 digit factory code?

Using the Owner’s Manual
The 5 digit security code is usually in the glove department if you have not moved the owner’s wallet card. The 5 digit code can also be found on years 2011- 2018 on a white label inside passenger side fuse box, it will be the 5 numbers you need, followed by a letter.

How do I reset my radio manually?

Then locate the power button on the radio. Which is typically located on the left side of the radio’s control panel. Once you have located the power button press and hold it for 20 seconds. While.

How do you soft reset a Ford radio?

And you can see it’s turned off you can release after that. And we’re gonna wait there you go it’s rebooting. Now. Just wait for that to load. Up and that’s how you reboot your ford sync 3. System.

How do I reset my Ford radio without the code?

Another trick that might work when the radio nags you for a code is bypassing it. To do so, restart the car engine and turn on the radio. If a code is asked, turn off the radio. Afterward, press and hold the radio button for a few seconds or up to a couple of minutes, enough time for the system to ditch the code.

How do I reset my Ford unlock code?

First you’ll punch in the factory. Code which will unlock the vehicle. Quickly press the 1 2 button after the code and you’ll hear the vehicle. Lock.

How do I unlock my Ford radio with code?

Number. We need a six. So that’s one two three four five and six to enter the second digit repeatedly press button two until it shows the correct.

How do you enter a Ford code?

Key. And you’re going to put it in you’re going to turn it on. And right on your dash. It’s going to display that five-digit code for you. So you have access to be able to do it.