How do I connect my Acura RDX?

Connecting Your Phone to Acura RDX Bluetooth
To connect your phone to the Acura RDX Bluetooth system, follow these general steps:
1. Ensure Bluetooth is Turned On: Make sure that Bluetooth is turned on in your phone and that your phone is discoverable.
2. Access Settings Menu in the Dash: Go to the settings menu in the dash of your Acura RDX.
3. Select Bluetooth App List: In the settings menu, select “device settings,” then “bluetooth app list”.
4. Add Bluetooth Device: Select “add bluetooth device” and choose your phone when it appears on the screen.
5. Compare and Connect: If prompted, compare the four-digit code provided by HandsFreeLink with the code that appears on your phone. If they match, connect to HandsFreeLink from your phone and select “On” to enable Automatic Phone Sync to import your call history and contact list.
6. Complete the Process: Once you’ve completed the process for pairing your phone with Acura RDX Bluetooth, you should be seamlessly connected for communication and more.
For specific instructions based on your phone type (Android or Apple), refer to the user-friendly guide provided by West Side Acura.
If you have navigation in your Acura RDX, use the interface dials to complete each step. If you don’t have navigation, use the selector knob to pair your phone with your RDX.
If you encounter any issues during the pairing process, refer to the Acura RDX’s Bluetooth connection instructions and ensure that you follow the steps accurately.

How do I connect my Acura RDX to WIFI?

In your acura highlight and click the hotspot icon from the home. Screen next toggle the hotspot. On off button at the top right corner of the screen to turn the hotspot.

How do I connect my phone to RDX?

Step-by-Step Guide to Connecting Your Device to the Acura RDX Through Bluetooth

1. If you’re using an Android phone, start by going to your Settings menu, then to Connections.
2. Keep the Bluetooth menu open until you’ve completed your setup.
3. On your Acura RDX’s display, select Phone, Connect Phone, then Connect New Device.

Why won’t my iPhone Bluetooth connect to my car?

Restart your device. Go to Settings > Bluetooth, and turn off Bluetooth. Wait for about 5 seconds, then turn Bluetooth back on. Check the manual that came with your car for more information on how to pair with a Bluetooth device.

How do I reset my Acura HandsFreeLink?

Press and release the Talk button. After the beep, say ”Clear. ” The HFL response is, ”This process will clear all paired phones, clear all entries in the phonebook, and clear the passcode.

How do I connect my phone to HandsFreeLink?

Select on or off a confirmation message for honda link assist appears. Select yes or no next you can set your device’s phone book and call history data to be imported.

How do I connect my HandsFreeLink to my Acura?

1. You can turn Bluetooth® function on and off. Press the (home) button. Select Settings. Select Connections.
2. phone paired to the system) Press the (home) button. Select Phone. Select Connect Phone.
3. Go to the Phone Menu screen. Select Change Connected Phone. When connecting to other phone: 3. Select a phone to connect.

How do I connect my Bluetooth to my 2011 Acura RDX?

Press. And release the button. And after the beeps a phone setup phone setup will appear in the multi information display. The system will then prompt you with a set of available commands.

Why can’t my iPhone connect to handsfree?

Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.

How do I connect my iPhone to my Acura Bluetooth?

Navigate to Phone Settings > Bluetooth Device List > Add Bluetooth Device. On your mobile device, select your Acura from the Bluetooth menu. The two will now begin pairing. Your mobile device and Acura multimedia system are now connected via Bluetooth.

How do I connect my iPhone to my 2013 Acura RDX?

You want to go to Bluetooth. And you want to turn that to on. And then you want to hit OK on the car so they can find each. Other. The stormy takes a couple seconds.