How can I tell which Subaru engine I have?

To determine which Subaru engine you have, you can follow these steps:
1. Check the displacement: Look for the engine’s displacement, which can be either EJ20 or EJ25. These are the most common displacements for Subaru engines. Other displacements, such as FA20 or EZ36, also exist but are not covered in this guide.
2. Compare characteristics: Once you have identified the displacement, compare the characteristics of your engine with the charts available online. If your engine shares the same characteristics as another engine, you can search the internet for pictures of both engines to verify which one you have.
3. Check the engine number: Some Subaru engines have a code printed directly on the engine. This code helps identify the engine’s specifications and factory code. The first 11 digits indicate the engine’s specifications, and the last four digits indicate the code specific to your engine. If you have the engine’s serial number, you can find it on the machined boss on the left side of the clutch housing.
4. Look for stamped or engraved numbers: Check the front or rear of the engine block, just below the head gasket, for a stamped or engraved number. Some Subaru engines also have the engine number located on the surface of the intake manifold or the cylinder head.
5. Consult a Subaru dealer or mechanic: If you are unsure about the engine type or need more specific information, it is recommended to contact a Subaru dealer or mechanic. They can provide you with accurate information based on the engine code or other identifying numbers.
Remember, it’s important to verify the information provided by these methods to ensure accuracy. If you have any doubts or need further assistance, don’t hesitate to reach out to a Subaru professional.

Is my engine code in my VIN number?

The fourth through eighth digits describe your vehicle’s model, body type, restraint system, transmission type, and engine code. The ninth digit is the check digit, which is used to detect fraudulent VINs.

Will my VIN number tell me what engine I have?

Can my VIN number tell me what engine I have? Yes. Characters 4-8 on a given VIN denotes the vehicle’s manufacturer, engine size, and type.

What engine is in my VIN?

“You can identify your car’s engine type by the VIN found in the owner’s manual or under the hood. The eighth digit contains the information on the engine.”

What Subaru engine is the EJ25?

The EJ25T produces 305 horsepower and 290 lb-ft of torque in the WRX STI model. The non-turbocharged version produces 170 horsepower and 174 lb-ft of torque in the Legacy and Outback models. In terms of performance, the EJ25 engine is capable of impressive acceleration times.

Where is the engine code on a Subaru engine?

The engine number is located on the right hand side that is below the turbo. So below the turbo as you can see there is where you can locate engine number that’s the engine number you’re seeing there.

How do I know what version my Subaru is?

The chassis plate for your Subaru can be found under the hood, on the strut tower for GC8 and GD chassis vehicles and in the left front door-jam of the GR and VA chassis vehicles.

How do I find my engine model?

You can easily find out what kind of engine is in your car by checking the VIN, which can be seen in the owner’s manual or under the hood. The VIN can also be found on the front of the driver’s side dashboard in most cases.

How do I find the engine code by VIN number?

To find your engine size, you can use your vehicle identification number (VIN). The tenth character from the left in the VIN denotes the model year, and the eighth character represents the engine codes.

What type of engine is in my Subaru?

At the heart of EVERY Subaru is the Subaru Boxer Engine; named for the horizontal movement of the pistons – much like boxers throwing punches. On this page you will learn why Subaru chose the Boxer engine, how it works, and the safety, performance and handling advantages it brings to the driving experience.

How can I check my engine code at home?

How to Use An OBD Scanner

1. Connect The Scanner. Your OBD scanner will have a connection cable with a 16-pin trapezoidal plug at the end.
2. Turn The Key. Insert your key in the ignition, but don’t start the engine.
3. Type In Your Vehicle Identification Number.
4. Locate Your OBD Codes.
5. Decipher Your Codes.