How can I make my Chevy 350 run cooler?

Tips to Make Your Chevy 350 Run Cooler
If you’re looking to make your Chevy 350 run cooler, there are several steps you can take to help improve its cooling performance. Here are some tips based on the search results:
1. Install an oil cooler: Installing an oil cooler can help decrease the engine’s operating temperature and extend its life. A popular option is a plate-and-fin oil cooler, which is great for dissipating heat and keeping the engine cool.
2. Check the cooling system components: Ensure that the water pump, radiator, and thermostat are in good working condition. A high-flow water pump and thermostat can help control the coolant temperature.
3. Upgrade the radiator: Consider upgrading to a larger or more efficient radiator. A four-row copper and brass radiator may be more efficient than a two-row aluminum unit.
4. Use electric fans: Dual electric fans can help improve cooling performance. They can be more effective than mechanical fans, especially in stop-and-go traffic or at low speeds.
5. Maintain proper coolant levels: Make sure the coolant levels are sufficient and that the coolant mixture is appropriate for your climate. Improper coolant levels or a weak coolant mixture can affect the engine’s cooling ability.
6. Consider a cooler thermostat: Switching to a cooler thermostat, such as a 160-degree thermostat, can help lower the operating temperature of the engine. However, it’s important to ensure that the thermostat is compatible with your engine and doesn’t cause other issues.
7. Improve airflow: Ensure that there are no obstructions blocking the airflow to the radiator, such as aftermarket fog lights or other accessories. Adding a shroud and/or an aluminum four-core radiator can also help improve airflow and cooling.
Remember, it’s important to regularly maintain your Chevy 350 and monitor its temperature to prevent overheating. If you’re experiencing persistent cooling issues, it may be helpful to consult with a professional mechanic for further assistance.
I hope these tips help you make your Chevy 350 run cooler!

What additive helps engine run cooler?

VP Racing Cool Down™ coolant additive is proven to reduce your engine temps (by up to 30°F) & cylinder head temps (by up to 75°F) while improving coolant flow. It works for gas and diesel engines & is safe for all radiator systems. Cool Down is ideal for your racing and street vehicles, RV, & towing applications.

What temp should a 350 Chevy run at?

200-212 is the optimal operating temp for a chevy v8; best power/ fuel economy, and least amount of wear. Towing uphill in 105 degree heat I ran at at around 130-140 for a while, but a good 180 degree thermostat will keep your temp 195-212 dgrees except in the nastiest/hottest conditions.

What causes a Chevy 350 to overheat?

A common SBC overheating issue is airflow over the radiator being blocked by a number of materials. Dirt, dust, leaves, and even insects that pass through a car’s front grille will get stuck on the vanes and thin metal plates that make up a radiator’s design.

What can I put in my radiator to make it run cooler?

Independent dyno tests prove that Hy-per Lube Super Coolant helps street applications using a 50/50 mix to run 8-10°F cooler, and racing applications using straight water to run up to 25°F cooler. Actual cylinder head temperatures can be reduced by up to 50°F.

What temp is too hot for engine?

Of course, factors such as air conditioning, towing and idling at a stop will impact this, but you should be fine if your car is running at anywhere between 190-220 degrees. Over this limit, and your radiator and coolant fluids run a higher risk of burning.

Is 230 degrees to hot for an engine?

Depends on the engine and the reason the temp is that high, but in general, 230 degrees is an acceptable oil or coolant temperature. Many engines run at around 230 degrees during normal operation and most engines will tolerate 230 degrees no problem.

What temp should a SBC run?

180-200 is a good range for carbed motors, 190-210 for EFI motors. If you run too cold, you get worse fuel efficiency, your motor oil becomes acidic due to not vaporizing the stuff out that needs to be vaporized, and your exhaust system may not last as long due to increased condensation.

What temp is too hot for a small block Chevy?

oil temps should generally be about 15 degrees higher than coolant temps and as long as coolant temps don,t generally exceed about 220F-230f degrees while running you’ll be fine, I generally try to keep my coolant temps in the 190f range , but in slow traffic on a hot day they can and do go up.

How can I make my engine run cooler?

If you are driving and your engine begins to overheat, take the following steps:

1. Turn off the air conditioning.
2. Crank the heater and fan up to full blast.
3. Top off the coolant cooling system with antifreeze or water.
4. Rev it up.
5. Pull over.
6. Be prepared.
7. Check coolant level.
8. Watch your temperature gauge.

Does advancing timing make engine run hotter?

Inversely, advancing timing to the correct amount will increase engine operating temperature while decreasing exhaust gas temperature. It varies by how much the temps will change because timing isn’t the only factor in engine temperature at that point.