AHG Auto Service » Make » Honda » Does Honda CR-V have a timing belt or timing chain?

Does Honda CR-V have a timing belt or timing chain?

Honda CR-V Timing Belt or Timing Chain
The Honda CR-V can have either a timing belt or a timing chain, depending on the specific model and year. Here is a breakdown of the timing belt/chain configuration for different generations of the Honda CR-V:
1. First-generation CR-V (up to 2001): These models were equipped with the B Series Honda engine, which used a timing belt.
2. Second-generation CR-V (2002-2006): These models were equipped with an engine that had a timing chain.
3. Third-generation CR-V (2007-2011): These models also had an engine with a timing chain.
4. Fourth-generation CR-V (2012-2016): The engines in these models, including the R20A four-cylinder engine and the turbo-diesel 2.2-liter engine, used a timing chain.
5. Fifth-generation CR-V (2017-present): All models of the Honda CR-V, including the 2018 and 2019 models, come with a timing chain .
It’s important to note that a timing belt typically requires replacement at regular intervals, usually between 90,000 and 120,000 miles, while a timing chain is generally designed to last the lifetime of the engine and does not require regular maintenance or replacement.
Please consult your owner’s manual or contact a Honda dealership for specific information about the timing belt/chain configuration for your Honda CR-V model and year.

What years of Honda CR-V have timing chains?

After that (from 2001 onwards) Honda fitted the K Series engine to CRVs, and this engine used a timing chain which should be good for the life of the engine. The R20A four-cylinder engine used from late 2012 also uses a timing chain, as does the turbo-diesel 2.2-litre engine from the same era.

How much does it cost to replace a timing chain in a Honda CR V?

The average cost for Honda CR-V Timing Chain Replacement is $1042.

How long does a timing belt last on a Honda CR-V?

between 60,000 to 100,000 miles
How long will a Honda timing belt last? Generally speaking, this will be between 60,000 to 100,000 miles. Some reports show vehicles have reached over 200,000 on the original timing belt, but this is not recommended because of the damage it can cause if it breaks and parts enter an internal engine component.

Which Honda engine has timing chain?

If you have a 4-cylinder model from 2003-2007, you engine has a timing chain; if you have the V6 model from those years, it’s a timing belt. An Accord from 2008-2012 with a 4-cylinder engine will have a timing chain, whereas the V6 engine models have a timing belt.

How long does a Honda timing chain last?

How long do timing chains last on a Honda CR-V? Timing chains can last up to 300,000 miles or more, but it is not that they fail, but that they stretch and the timing gets to be out of sync with the piston position.

What year did Honda go to timing chains?

Honda V6 engines have changed from timing belts to timing chains as of the 2018 model year. That change also applied to Honda outboards. Reliability and lower maintenance cost were the main reasons as just about every auto manufacturers use timing chains.

What year Honda CR-V is the most reliable?

What year Honda CR-V is the most reliable? The best years for the Honda CR-V are the 2015–2016 model years.

What are the symptoms of a worn out timing chain?

Misfiring, poor idle, and rough running could mean the chain has jumped a tooth and the timing is off. Replacement is urgent, because the chain could break at any point, and the engine could be damaged from incorrect valve timing. Metal shavings or visible pieces of chain in the oil would be another potential sign.

Why does Honda use a timing belt instead of chain?

The setup used in most Honda models, the timing belt was introduced in the mid-1960s as a much quieter alternative to a timing chain. Belts also use tension pulleys that aren’t dependent on engine oil levels to stay in place.

When should I replace my timing chain Honda CR-V?

According to the Honda maintenance schedule, your Honda’s timing belt and water pump generally needs to be inspected and/or replaced every 7 years or 60,000-100,000 miles traveled.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment