Bolt Pattern Compatibility Between GMC and Ford
When it comes to the bolt pattern compatibility between GMC and Ford vehicles, it’s important to note that GMC and Ford do not have the same bolt pattern. The bolt patterns for these two manufacturers differ, which means that wheels designed for one may not fit the other without the use of adapters.
The bolt pattern for GMC vehicles typically varies based on the specific model and year. For example, a Chevy/GMC 1/2-ton Pickup from 1967 to the present has a bolt circle of 6×5.5 inches, while a Chevy/GMC 3/4-ton Pickup from 1965 to 2010 has a bolt circle of 8×6.5 inches.
On the other hand, Ford vehicles have their own distinct bolt patterns. For instance, the Ford F-150 has a bolt pattern of 6x135mm, and the Ford F-250 Super Duty has a bolt pattern of 8x170mm.
In summary, due to the differences in bolt patterns, it’s unlikely that wheels designed for a GMC vehicle will fit properly on a Ford vehicle, and vice versa, without the use of adapters.
Contents
- Can eight bolt GMC rims go on a Ford?
- Will Chevy rims fit on a Ford truck?
- What are Ford lug patterns?
- Are f 150 and silverado same lug pattern?
- What is GMC bolt pattern?
- Will a 6×5 5 fit a Ford F 150?
- Will a Ford 8 lug fit a GMC 8 lug?
- What lug pattern is a Ford truck?
- Will 5×5 5 fit a Ford?
- Will F250 rims fit Chevy 2500?
Can eight bolt GMC rims go on a Ford?
Will Chevy 8 lug wheels fit Ford or dodge? Yes if the Ford is pre 1998. After that, they switched to a different bolt pattern. Dodge and GM still use the same pattern unless it’s a 2013 and up GM.
Will Chevy rims fit on a Ford truck?
In simple terms, yes. Check that the spacing is correct to fit over break calibers (mostly anything over a 16in rim will) and wont rub the inside of the wheel well. If it is 4×4 also check your front locking hubs so that it fits over them, Chevy, Dodge, Ford, and Jeep trucks might have different sizes on these.
What are Ford lug patterns?
1997-2003 Ford F-150 Lug Pattern: 5×5.31” (5×135mm) 2004-2008 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm) 2009-2014 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm) 2015-2020 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm)
Are f 150 and silverado same lug pattern?
The good news is that yes, Chevy uses the same 6-lug pattern for just about all of its trucks and SUVs! You’ll still want to confirm your make and model with our service team to make sure that you’re getting the right wheels, but chances are that the 6-lug bolt pattern will be the same.
What is GMC bolt pattern?
Bolt Patterns Listed By Vehicle
| Chevy and GMC Trucks and SUV | Year | Bolt Pattern |
|---|---|---|
| Chevy & GMC 1/2 Ton Trucks (4X4) | ’67-’87 | 6 x 5.5″ |
| Chevy & GMC 1/2 Ton Trucks (2WD) | ’88-’98 | 5 x 5″ |
| Chevy & GMC 1/2 Ton Trucks (4×4) | ’88-’98 | 6 x 5.5″ |
| Chevy & GMC 1/2 Ton Trucks | ’99 & Newer | 6 x 5.5″ |
Will a 6×5 5 fit a Ford F 150?
Compatible Wheels
Silverado wheels do fit on F-150s, but not all wheels are compatible. In general, wheels with a 6×5. 5” bolt pattern will work, but you should double check the bolt pattern and offset of the wheels you plan to buy.
Will a Ford 8 lug fit a GMC 8 lug?
The newer stuff (97+?) is metric and will not fit. The older stuff is 8 on 6.5″ and will fit. The center hub hole might be a different size though.
What lug pattern is a Ford truck?
2009-2014 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm) 2015-2020 Ford F-150 Lug Pattern: 6×5.31″ (6×135mm) 2021-Present Ford F-150 Lug Pattern: 6×5.31″ (6×135mm)
Will 5×5 5 fit a Ford?
Large Ford Pattern | 5 on 5.5 inches
Early Ford passenger cars use a 5×5. 5-inch bolt pattern, which can also be listed as 5×5-1/2 inches. Later, the 5×5. 5-inch bolt pattern was only used on Ford trucks.
Will F250 rims fit Chevy 2500?
Ford and GM wheels do not interchange.
