Ford 3.3 L V6 and Internal Water Pump
The Ford 3.3 L V6 engine does not have an internal water pump. The rear-wheel-drive version of the 3.3 L V6, which is used in the F150, has an external water pump that is located on the outside of the front cover. On the other hand, the front-wheel-drive version of the 3.3 L V6 has an internal water pump that is located inside the front cover.
It’s important to note that the internal water pump in the front-wheel-drive version of the 3.3 L V6 is quite robust and can last a long time. However, if it does develop a leak, it will typically exit the side of the block through a weep hole.
To summarize, the Ford 3.3 L V6 has an external water pump in the rear-wheel-drive version and an internal water pump in the front-wheel-drive version.
Contents
- How many miles per gallon does a 3.3 L V6 Ford F-150 get?
- What is the Ford v6 water pump lawsuit?
- What is the difference between auxiliary water pump and engine water pump?
- Does the Ford 3.7 engine have an internal water pump?
- What Ford engines have an internal water pump?
- What is the Ford V6 water pump lawsuit?
- Is the Ford 3.3 V6 a good engine?
- How many miles per gallon does a 3.3 L V6 F-150 get?
- What is the water pump inside the engine?
- How much does it cost to replace a Ford internal water pump?
How many miles per gallon does a 3.3 L V6 Ford F-150 get?
20 city/24 highway MPG
3.3L Ti-VCT V6 Engine
The engine that comes standard on the 2021 Ford F-150 is a 3.3L V6. It can produce as much as 290 horsepower and 265 lb-ft of torque. With the 4×2 drivetrain, it delivers an EPA-estimated 20 city/24 highway MPG, helping you make less gas station stops when traveling from one worksite to another.
What is the Ford v6 water pump lawsuit?
According to the lawsuit, defective, unreinforced bearing oil seals used in the water pump allow coolant to leak across the mechanical seals and penetrate the bearing seals, which contaminates and washes out the bearing lubricant.
What is the difference between auxiliary water pump and engine water pump?
An auxiliary water pump is different to a single water pump, because it’s an electrically controlled motor. Its primary use is to circulate water by way of a bypass hose from the main coolant lines to a heater core.
Does the Ford 3.7 engine have an internal water pump?
Ford’s EcoBoost engine lineup is the notable range of Ford engines that feature an internal water pump. These innovative powerplants, available in various displacements such as the 3.5L V6, 3.5L EcoBoost V6, and 3.7L V6 variants, incorporate this advanced cooling system design.
What Ford engines have an internal water pump?
Ford’s EcoBoost engine series prominently features internal water pumps.
What is the Ford V6 water pump lawsuit?
According to the lawsuit, defective, unreinforced bearing oil seals used in the water pump allow coolant to leak across the mechanical seals and penetrate the bearing seals, which contaminates and washes out the bearing lubricant.
Is the Ford 3.3 V6 a good engine?
They are reliable, but gutless in comparison to the ecoboosts and V8. You will have to get on them to feel like there is any life to them. They will get the job done within the ratings of the truck but you will notice it working to get it done.
How many miles per gallon does a 3.3 L V6 F-150 get?
2023 Ford F-150 MPG: 3.3-Liter V-6
However, you’ll get an EPA-estimated 19/23 MPG (City/Highway)1 without auto start/stop.
What is the water pump inside the engine?
A water pump is vital to a car engine’s operation because it ensures the coolant keeps moving through the engine block, cylinder head, hoses and radiator, and maintains an optimum operating temperature. It is usually driven by a belt from the crankshaft pulley or sprocket.
How much does it cost to replace a Ford internal water pump?
Taking all these points into consideration, you can expect to pay anywhere from $375 to $787 (including parts and labor).
