Yes, Dodge did make a 400 engine. The Dodge 400 was a mid-size car built by Dodge, introduced for the 1982 model year. However, it should be noted that the Dodge 400 mentioned here is not the same as the Dodge 400 engine that was produced in the 1970s. The Dodge 400 engine was a member of the B-series of V-8 engines and was introduced in 1972 as a high-performance and standard version. It was essentially a bored-out version of the 383 engine and was produced until 1978.
Contents
- Did Chrysler ever make a 400 engine?
- Is a 400 a Pontiac engine?
- Is Mopar 383 and 440 same block?
- What Dodge came with a 440?
- How much horsepower does a 1983 Dodge 400 have?
- Who made the 400 engine?
- What cars had a 400 engine?
- How much horsepower does a Dodge 400 engine have?
- Was the 440 faster than the 426 Hemi?
- What year was the Dodge 400 made?
Did Chrysler ever make a 400 engine?
The 400 cu in (6.6 L) B engine was introduced in 1972 to replace the venerable 383, and were power-rated via the net (installed) method. Chrysler increased the bore size of the 383 to create the 400. Its bore of 4.342-inch (110.3 mm) was the largest used in any production Chrysler V8 at the date of its introduction.
Is a 400 a Pontiac engine?
In 1967, Pontiac took the basic recipe of the 389 and added a bit to its bore, creating the 400. With a 4.12-inch bore and a 3.75-inch stroke, Pontiac’s 400 had similar bore and stroke to Chevy’s big-block 396 (even when the Chevy actually displaced 402 cubic inches).
Is Mopar 383 and 440 same block?
The major difference between these two Mopar legends is the deck height of the block: 9.98-inch for the 383 and 10.725-inch for the 440.
What Dodge came with a 440?
Dodge Dart 440 (1962)
Included was the standard equipment of the Dart and Dart 330, plus backup lights and exterior moldings. The Dart 440 was available as a 4-door sedan, 2-door hardtop, 4-door hardtop, 2-door convertible and 4-door station wagon.
How much horsepower does a 1983 Dodge 400 have?
Dodge 400’s aerodynamic styling allows it to hug the road for precise handling. It also contributes to its excellent efficiency. Dodge 400 can cruise at 50 miles per hour while using only 13.5 of its 94 total horsepower.
Who made the 400 engine?
Pontiac
In 1967, Pontiac took the basic recipe of the 389 and added a bit to its bore, creating the 400.
What cars had a 400 engine?
The 400 saw extensive use in full-size Chevrolet and GMC trucks; K5 Blazer/Jimmy, 1/2-ton, 3/4-ton, 1-ton, and even larger ‘medium duty’ trucks had an option to be equipped with a 400. The engine was available in midsize A-Body and full-size B-Body passenger cars until the end of the 1976 model year.
How much horsepower does a Dodge 400 engine have?
In this application, the 400 had a four-barrel carburetor, had the same 8.2:1 compression, and was rated at 195 horsepower and 305 pound-feet of torque.
Was the 440 faster than the 426 Hemi?
The 426 Hemi was better than a 440 six pack because it had more horsepower and faster 1/4 mile and 0–60 times. The 426 Hemi had 425 horsepower at 5,000 rpm while the 440 six pack had 390 horsepower at 4,700 rpm.
What year was the Dodge 400 made?
| Dodge 400 | |
|---|---|
| Manufacturer | Chrysler Corporation |
| Production | 1981–1983 |
| Model years | 1982–1983 |
| Assembly | Saint Louis Assembly, Fenton, Missouri |
