AHG Auto Service » Make » Chevrolet » Did Chevy make a 4WD S10?

Did Chevy make a 4WD S10?

Yes, Chevy did make a 4WD version of the S10. The S10 was available as a 4WD or 2WD only, and the 4WD version was fitted with a low-range gear. This allowed the S10 to be used for off-road driving and provided better traction in challenging conditions.
If you have any more questions or need further information, feel free to ask!

Is a 2001 Chevy S10 4WD?

New for the year is a four-door 4WD crew cab configuration enabling you to bring along four of your friends. Headroom is ample and seats are supportive, but the driver sits low, facing a tall steering wheel and cowl.

What year did Chevy make a 4 door S10?

2001
Crew Cab (2001–2004)
In 2001, a four-door Crew Cab configuration was introduced for the Chevrolet S-10 and GMC Sonoma (just three years before the full-size Silverado 1500 added it).

Is 4 high or 4 low better for snow?

When conditions are slippery – say deeper snow or mud – but you’re driving at typical road speeds, use 4Hi. Need maximum traction and driving at low speeds? Go to 4Lo. When you’re trying to move an unusually heavy load, climb a steep incline or get through tricky conditions like deep mud, 4Lo is the best choice.

How do you put a Chevy S10 in 4 wheel drive?

Bring your vehicle to a stop shift to neutral. And select either four high Auto. Or too high the shift will be requested. After you press the selector. And a 4X4 symbol will flash on the DIC.

Was there a Chevy S10 SS?

The Chevrolet S-10 SS was a high-performance version of the S-10, introduced in 1994. Fewer than 3000 SS’s were produced yearly on average. When introduced, the SS was sold in only three colors: Onyx Black, Summit White, and Apple Red. The SS was discontinued in 1998.

What year did Chevy come out with 4×4?

Chevrolet followed in 1957 releasing their first production 4×4 pickups in 1/2, 3/4 and 1 ton sizes. Prior to this, these trucks had 4×4 conversions done by NAPCO in which the trucks were sent out for a NAPCO Powr-Pak 4×4 conversion and then returned.

When did Chevy start 4WD?

GMC offered the half-done kit at dealerships in 1956,with Chevrolet getting on board in 1957. In 1960, GM redesigned their pickup trucks and started offering their in-house built 4WD system.

When did Chevy come out with 4WD?

1957
GMC offered the half-done kit at dealerships in 1956,with Chevrolet getting on board in 1957. In 1960, GM redesigned their pickup trucks and started offering their in-house built 4WD system.

Did the Chevy S10 come in 4X4?

Engine choices for the Chevrolet compact pickup truck consisted of a 120-horsepower 2.2-liter four-cylinder and a 4.3-liter six-cylinder engine generating 180 horsepower. With the V-6 engine, the S-10 is offered with both two-wheel and four-wheel drivetrain systems.

How much is a Chevy S10 worth?

Prices for a used Chevrolet S-10 currently range from $2,880 to $13,500, with vehicle mileage ranging from 32,951 to 227,996.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment