AHG Auto Service » Make » Toyota » Can you put 5W-30 in Toyota Tundra?

Can you put 5W-30 in Toyota Tundra?

Can You Use 5W-30 Oil in a Toyota Tundra?
Yes, you can use 5W-30 oil in a Toyota Tundra. While the factory recommendation may be 0W-20 or 5W-20, using 5W-30 is also considered acceptable for certain conditions and climates. Some users have reported that their trucks seem to perform well with 5W-30 oil, even in hot climates like California. It’s important to note that the choice of oil viscosity can depend on factors such as climate, towing, and personal preference.
Some users have mentioned that they chose 5W-30 over 0W-20 or 5W-20 due to living in warmer climates and concerns about the thinness of the recommended oils for long, hot summers. Additionally, it’s been noted that using 5W-30 in the winter or colder temperatures and 10W-30 in the summer is a viable approach.
It’s also worth considering that the use of 5W-30 oil may be suitable for extreme conditions, and some users have reported using it without any issues. However, it’s essential to ensure that the chosen oil meets the necessary standards and specifications for the vehicle.
Ultimately, while the factory recommendation may be 0W-20 or 5W-20, using 5W-30 oil in a Toyota Tundra is considered acceptable under certain circumstances and can be a viable choice for some users .

What happens if I use 5W-30 instead of 5w20?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.

What oil does Toyota recommend for tundra?

Toyota Tundra Oil Types
It’s recommended that you use a 0W-20 fully synthetic car oil.

Is it OK if I put 5w20 instead of 0w20?

Simply put, no. Some engine manufactures will say that 5w20 can be installed but 0w20 is preferred, especially if the engine was manufactured before the most recent change in API standards. But most newer engines were designed with tolerances designed specifically with 0w20 being installed.

What oil does a 5.7 Tundra take?

Oil Grade: API*

Viscosity: All TEMPS….0W-20 – 0W-20 is the best choice for good fuel economy and starting in cold weather. If 0W-20 is not available 5W-20 may be used. However, it must be replaced with 0W-20 at the next oil change.
Capacity: With filter 8.5 quarts. After refill check oil level.

Can I use 5w30 instead of 0W20 Toyota Tundra?

5w30 is cheaper will still provide the same lubrication but will lower fuel economy but you will probably never notice it. There are several other Tundra owners on this site that I have seen using 5w30 in their trucks.

What happens when you put 5w30 in a 0w20 engine?

Yes, it is OK to use 0W20 instead of 5w30 as both oils are SAE 30 grade at engine operating temperatures. Therefore, there should be no difference in performance as long as the viscosity motor oil is used in accordance with the owner’s manual.

Can I use 5w30 instead of 5w20 Toyota?

5w20 and 5w30 is interchangeable, meaning you can use 5w20 in an engine that recommends 5w30, and you can use 5w30 in an engine that recommends 5w20. It’s not a big deal.

Can I put 5W 30 in my engine?

5w30 motor oil’s ability to function in a large variety of engine types and under a wide range of temperature conditions makes it incredibly versatile. Whether you have a light-duty petrol or diesel engine, 5w30 is often the suggested motor oil to use because it flows more easily in winter temperatures.

What happens if you use 5W-30 instead of 0w20?

What happen if my car requires 0w20 and I put 5w30? Absolutely nothing. Completely. It almost literally doesn’t matter, except at the outer limits in super cold climates… and then only maybe.

What oil does the 5.7 L Tundra take?

8 liters 0W-20 Toyota Tundra motor oil, oil filter, and hardware for 2007-2021 5.7L V8 applications. RAVENOL fully synthetic USVO technology motor oil carries the Formal Licensed API SN resource conserving and ILSAC GF-5 oil specifications required for Toyota Tundra engines.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment