AHG Auto Service » Make » Ford » Can you fit a 4×8 in Ford Transit Connect?

Can you fit a 4×8 in Ford Transit Connect?

Based on the search results, it appears that a 4×8 sheet cannot fit flat inside a Ford Transit Connect. The cargo version of the Transit Connect has a flat floor that is 48″ wide on the inside, but it is roughly 1 foot short of fitting the whole sheet inside. However, it is possible to fit a 4×8 sheet of plywood in a Ford Transit Connect by folding down one of the backseats.
Conclusion:
While a 4×8 sheet cannot fit flat inside a Ford Transit Connect, it can be accommodated by folding down one of the backseats.

Can you fit a 8×4 sheet in a transit connect LWB?

But the LWB/L2 Transit Connect isn’t ‘that’ much smaller, and will apparently even take a few 8×4 sheets inside at a push (which is something I’d quite like).

What vans will take an 8×4 sheet?

With a maximum internal load length of 2,555mm, the short-wheelbase Ford Transit Custom can easily swallow an 8×4 sheet. There’s an easy-to-clean PVC lining for the cargo floor standard across the range too, and full-height hardboard on the side walls on Trend, Limited and Sport models.

How long is the cargo area in a Ford Transit Connect?

The Transit Connect SWB is the smaller of the two variants and its exterior measures 4,425mm long and 1,830mm high. The load area is 1,786mm long at the floor and 1,269mm from floor to roof, which equates to a load volume of 2.9 cubic metres.

How big is the cargo space in a Ford Transit Connect?

With the short wheelbase it contains 103.9 cubic feet of cargo area. The long wheelbase layout expands that to 128.6 cubic feet. As you’ve already seen, the Ford Transit and Ford Transit Connect are two very different sizes. Because of that gap, they also utilize dissimilar engines.

How big is the back of a Ford Transit Connect?

The Transit Connect has a max load space width of over 1.5m at the floor and a load space height of over 1.2m from floor to roof. This means there’s enough room for two Euro-pallets or four standard 8′ x 4′ boards in the load box.

Can you fit an 8×4 sheet in a transit?

Re: 8’x4′ sheets in SWB Custom
They fit flat on the floor no problem but need to go diagonally if they’re standing up because of the bulkhead.

Can you fit 8×4 sheet SWB Transit Connect?

kimble New Member. The SWB without the bulkhead will take so many 8 x 4’s as there is a bit of extra room behind the seats. With the bulkhead it is 5″ too short, but to compensate you can just raise the sheets at one end.

How much room is in a Ford Transit Connect?

Capacities

Capacities: Passengers, Luggage, Fuel Cargo Van SWB (cu.-ft.) Cargo Van LWB (cu.-ft.)
Minimum Seating Capacity 2 2
Passenger Volume 63.2 63.2
Cargo Volume – Behind 1st row 104.8 127.4
Cargo Volume – Behind 1st row with front-passenger seat folded 123.2 145.8

Can you fit a bed in a Transit Connect?

There were a couple that had just made one big bed in the cargo. Area there was a few that had two different benches. And a table that would set in the middle.

Can you fit a 8×4 sheet in a Transit Connect LWB?

But the LWB/L2 Transit Connect isn’t ‘that’ much smaller, and will apparently even take a few 8×4 sheets inside at a push (which is something I’d quite like).

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment