Can I use 5w30 instead of 5w20 in my Honda Accord?

According to the search results, it seems that using 5W30 instead of 5W20 in a Honda Accord is generally acceptable. While the owner’s manual may recommend 5W20, some users have reported using 5W30 without any issues. It is important to note that if your vehicle is still under warranty, it is advisable to use the oil specified in the manual. However, if your vehicle is no longer under warranty, you can use 5W30 if you prefer. Hondas are known to perform well with both oil viscosities, and there doesn’t seem to be a significant difference in terms of engine performance or longevity.
It’s worth mentioning that using the recommended oil viscosity is generally recommended to ensure optimal engine performance and fuel efficiency. However, if you decide to switch to a different oil viscosity, it’s important to monitor your vehicle’s performance and consult with a qualified mechanic if you have any concerns.
Please note that this information is based on user experiences and opinions found in the search results. It’s always a good idea to consult your vehicle’s owner’s manual or a certified mechanic for specific recommendations regarding oil viscosity for your Honda Accord.

Can I use 5w30 instead of 5w20 for high mileage car?

Typically, a 5W-20 oil provides higher gas mileage than a 5W-30 due to its more effortless flow. However, the 5W-30 oil is still a suitable option where fuel efficiency is concerned. Using 5W-30 simply produces a bit less economy because moving an oil that is less freely flowing through the system consumes more energy.

Does 5w30 or 5w20 matter?

5w20 is thinner and gives a better fuel economy (and also slightly higher power) but also a higher wear. 5w30 provides the better protection while not being too thick to flow through the oil channels in the engine.

Can you put 5w30 in a 5w20 engine Honda?

It won’t cause any problems. 5w30 is thicker than 5w20 in operating temperatures, but that doesn’t mean there will be less oil flow.

Can you use 5w30 in a Honda Accord?

Any 5w20 or 5w30 name brand oil will work just fine. Mobil 1, Castrol, Pennzoil, Valvoline etc. A high mileage oil would be beneficial if you can find it but its not a big deal if you can’t.

What happens if you use 5w30 instead of 0w20?

No car “requires” 0W-20. It’s a recommendation, not a requirement. 5w30 will be thicker (more viscous). It will offer better projection to bearings and some other wear surfaces at the expense of slightly worse cooling of some other parts and increase oil pressure delay at extremely cold temperatures.

What happens if you put 5w30 in a 0w20 car?

Originally Answered: What happen if my car requires 0w20 and I put 5w30? This answer depends on the climate where you live. If you start your car with temperatures below about 50ºF, you will have much more engine wear on each start of the engine. If you are in a hot climate, there will be more wear, but not measurable.

Which engine oil is best for Honda Accord?

The recommended Honda Accord oil type is 0W-20.
Learn more about what type of oil to use with the Honda Accord in this guide from the service team at Weir Canyon Honda.

What happens if you put 5w30 instead of 5w20?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.

Is there much difference between 5w20 and 5w30?

The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film. When looking at 5W-30 vs 10W-30, they both provide the same viscosity at operating temperature, as indicated by their identical “30” ratings.

What is a good substitute for 5w20 oil?

SAE 0W-20 motor
For example, if your car calls for SAE 5W-20 motor oil you can use SAE 0W-20 motor oil because the second number (20) is the most crucial number and your engine is designed to take into account the viscosity of the motor oil at engine operating conditions.