Can I use 5W30 instead of 5W20 in my Ford Fusion?

Can I use 5W30 instead of 5W20 in my Ford Fusion?
According to Ford’s specifications, the recommended viscosity rating for the Ford Fusion is SAE 5W-20. Ford states that 5W-20 oil provides optimum fuel economy and durability performance, meeting all the requirements for the engine of the Fusion.
Using a different oil viscosity, such as 5W-30, may cause a drop in performance and reduce the service life (“durability”) of the engine. Additionally, fuel economy may be degraded if a higher viscosity oil is used.
Therefore, it is advisable to stick with the recommended 5W-20 oil for your Ford Fusion to ensure optimal performance and durability.

Can a Ford Fusion take 5w30?

My 13 and 14 fusions with 2.0 engine both specified 5w30 in the manual and on the fill cap.

Is there much difference between 5W20 and 5W30?

The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film. When looking at 5W-30 vs 10W-30, they both provide the same viscosity at operating temperature, as indicated by their identical “30” ratings.

Does 5W-20 vs 5W 30 matter?

So, due to viscosity, 5w20 is a thinner oil during operating temperatures, whereas 5w30 is thicker during operating temperatures. A majority of manufacturers are now producing engines that operate on 5w20 oil, to which it’s important to stick to this viscosity and not substitute 5w30.

What happens if you put 5w30 instead of 5w20?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.

Can I use 5w30 instead of 5w20 for high mileage car?

The 5W is the flowability of the oil which means a lower number flows better at lower temperatures than a 10W oil. 5W30 is an acceptable substitute for 5W20 I think and would be ok on a high mileage Vehicle.

How much thicker is 5w30 than 5w20?

As already said, both 5W-20 and 5W-30 are the same viscosity when the engine is cold. The 5W-20, however, will remain a little thinner once you reach operating temperature to help improve fuel economy and flow fast enough to fill the tight tolerances in the engine.

Can I use 5w30 instead of 5w20 in my Ford Focus?

You want to stick with the 5w20 because it is thinner, requires less energy to pump through the engine and cleans better. If your cars were older or exhibited oil consumption problems, you would consider switching from the recommended 5w20 oil to a thicker oil like 5w30 or 10w30.

Is there much difference between 5w20 and 5w30?

The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film. When looking at 5W-30 vs 10W-30, they both provide the same viscosity at operating temperature, as indicated by their identical “30” ratings.

What can I replace 5w20 with?

For example, if your car calls for SAE 5W-20 motor oil you can use SAE 0W-20 motor oil because the second number (20) is the most crucial number and your engine is designed to take into account the viscosity of the motor oil at engine operating conditions.

Can you use 5W-30 instead of 5W-20 in Ford Fusion?

Can I use 5w30 instead of 5w20 in my Ford? The Ford owner’s manual states that 5w20 oil provides the best fuel economy and durability performance for your car’s engine. If you use the higher thickness (30 weight), your gas mileage will definitely go down.