Based on the search results, it appears that not all Subaru TPMS (Tire Pressure Monitoring System) sensors are the same. Subaru uses a variety of TPMS sensors depending on the year, model, and rim of the vehicle. It is important to ensure that the TPMS sensor being used is the proper unit for the specific vehicle. To determine the correct TPMS sensor for a Subaru vehicle, it is recommended to input the VIN number into a tool provided by Subaru or consult with customer support before making a purchase.
Contents
- How do I know which TPMS sensor I need?
- Are all TPMS sensors the same?
- Are OEM TPMS sensors better than aftermarket?
- What is the life expectancy of a Subaru TPMS sensor?
- What brand of TPMS sensors does Subaru use?
- Should I replace one or all TPMS sensors?
- How does TPMS know which tire is low?
- How do I program my Subaru TPMS?
- Can you just replace one TPMS sensor?
- Does Subaru have a TPMS reset button?
How do I know which TPMS sensor I need?
And rock salt. While some ouais sensors do not fit a rubber stem. Many now do as more OE suppliers. Are starting to switch over to rubber determine.
Are all TPMS sensors the same?
Yes, most TPMS sensors are vehicle specific. In cars with factory-installed TPMS sensors, the sensors are always vehicle-specific. Automakers get these systems from specific suppliers, and the supplier can vary from model to model. If you use an incompatible TPMS sensor, it likely won’t work with your car’s system.
Are OEM TPMS sensors better than aftermarket?
OE TPMS Sensors last longer, have a 1 in 1 million failure rate, come with a manufacturer warranty, and are much better understood by auto shops around the country. Don’t waste money and time with cheap knock offs. Never compromise your safety and the safety of other to save a buck.
What is the life expectancy of a Subaru TPMS sensor?
TPMS Life Expectancy
The estimated life expectancy of an OE TPMS sensor is 5 to 12 years, with the average lifespan being 7 years. TPMS life expectancy is directly related to the number of radio frequency transmissions the sensors make.
What brand of TPMS sensors does Subaru use?
Schrader Electronics
The manufacturers of the Subaru TPMS are Schrader Electronics. The tables below show which models they are fitted to.
Should I replace one or all TPMS sensors?
If one of your TPMS sensors fails and needs replacement, you can replace it individually. However, if the failure was caused by a dead sensor battery, it’s likely that the other sensors are close to failing as well.
How does TPMS know which tire is low?
While the indirect TPMS uses the Antilock Braking Systems (ABS) to monitor the wheel speeds of each tire. If there is a tire that has a different speed than the other tires, it will trigger the warning light as this means it is too low.
How do I program my Subaru TPMS?
Hold the TPMS reset button until the tire pressure light blinks three times, then start the car and wait 20 minutes for recalibration. The reset button is usually beneath the steering wheel, or consult your user’s manual.
Can you just replace one TPMS sensor?
If one of your TPMS sensors fails and needs replacement, you can replace it individually. However, if the failure was caused by a dead sensor battery, it’s likely that the other sensors are close to failing as well.
Unfortunately, Subaru doesn’t install a TPMS reset switch on cars sold in the U.S. If the warning light remains illuminated even after you’ve confirmed that your tires are inflated to the correct pressure, you’ll need to visit a tire shop or a dealership to have the system reset.
