Are all Subaru axles the same?

Are All Subaru Axles the Same?
Based on the information from various Subaru forums and discussions, it appears that there is a consensus that Subaru front and rear axles are generally the same. This means that the same axles can be used for both the front and rear of the vehicle. This is supported by discussions on Subaru Outback Forums, Subaru Legacy Forums, and Subaru Impreza GC8 & RS Forum & Community, where users have shared their experiences and confirmed that the axles are interchangeable between the front and rear of the vehicle , , [[3]], ,.
Additionally, it’s worth noting that the compatibility of Subaru axles may vary based on the specific model and year of the vehicle. However, the general consensus seems to be that the axles are interchangeable between the front and rear, with some users even mentioning that they have used axles from different Subaru models with success.
It’s important to keep in mind that while the general consensus leans towards the interchangeability of Subaru axles, it’s always recommended to verify compatibility based on the specific vehicle model and year to ensure the correct fit.
If you have any further questions or need more specific information about a particular Subaru model, feel free to ask!

Should you replace both CV axles at the same time?

Many mechanics recommend changing both left and right CV axles simultaneously once one goes bad. The reasoning is that both axles have similar miles, wear, and working conditions. So, if one joint has failed already, chances are the other side isn’t far behind.

Are all car axles the same?

The type of axle or shaft used in a vehicle depends on the vehicle’s design, and some vehicles may use the same size axle or shaft for all wheels, while others may use different sizes. For example, some front-wheel-drive cars have a transaxle, which combines the transmission and the front axle into a single unit.

Are driver and passenger side CV axles the same?

Is it just like the passenger side? The CV joint is attached to the axle , yes it would be the same as the passenger side it may differ in length . The joints give trouble not the axle, the CVjoints can be checked with out removing the axle .

Which CV axle wears out first?

Each CV axle drives a single wheel, so a pair is always required. You will find in most vehicles that one CV axle side is shorter than the other, typically the driver’s side and a longer shaft on the passenger side. You should identify the longer shaft first as this typically is going to be the side that fails first.

Are all CV axles the same?

CV axles are mostly not specific to particular car or model, they are assemblies of stock components from a limited number of global CV axle manufacturers.

Should I replace the CV joint or the whole axle?

If the vehicle has over 150,000 miles then replacing both CV joints is a reasonable idea. On the other hand if the joint failed due to the boot being torn/ leaking grease or a collision, then replacing just the failed CV joint would be a sensible solution.

Should you replace both axles at the same time?

It is always safest and easiest to replace both axles at the same time. Although it is unnecessary to change both, axles are not hugely expensive to replace; changing both will give you peace of mind knowing nothing different is introduced.

Do you have to replace both axles?

It is always safest and easiest to replace both axles at the same time. Although it is unnecessary to change both, axles are not hugely expensive to replace; changing both will give you peace of mind knowing nothing different is introduced.

Are both rear axles the same?

Not all rear axles are the same, as the support and mounting methods determine the type.

How can you tell the difference between axles?

Usually this is located on the driver’s side of the trailer. Another way we can determine which axle we need is by measuring the diameter of the axle.